What is a Com.G@te?

A Com.G@te is an optional accessory for Huber units with Pilot ONE.

Depending on the model of your Huber unit, you would use either external Com.G@te (part number HB6915) or the the internal Com.G@te (part number HB31217).

The Com.G@tes provide the following interfaces:

• Analogue interface (AIF) for 4-20 mA communication
• POKO (volt-free contact / floating contact)
• ECS (external control signal)
• RS232/RS485 (serial)
• The external Com.G@te also has a level interface (to connect an external float switch, for monitoring the level of an externally closed application).

These are in addition to any interfaces already on the Huber unit.  A Com.G@te is always required if you need an analogue interface.