Do I need a thermoregulator to heat and cool Mya 4?

No, you do not need a thermoregulator for your Mya 4.


The heating of Mya 4 heating is achieved using heating cartridges in all four zones. This provides fast and precise heating.


The active cooling is provided by Peltier technology and a cooled water supply is required for the heat exchanger.


Recommended Supply:

Coolant Supply Mains water or ethylene glycol mix (max 30%)

Max. coolant temperature 15 °C (up to 35 °C, however performance will be affected)

Min. coolant temperature 5 °C

Max. flow rate 5 L/min

Min. flow rate 2 L/min

Max. coolant pressure 2 bar

Min. coolant pressure 0.3 bar

If using a thermoregulator (both specs below required):

Min. cooling power at 15 °C 1.5 kW

Min. cooling power at 0 °C 1.0 kW